Concrete Paving Design Spreadsheet – Non Loading Stresses

This suite of 2 spreadsheets allows the designer to undertake the analysis of the curing conditions likely for a new concrete pavement project.

Separate spreadsheets are included for the calculation of the stresses created in the pavement by the curling of the pavement due to temperature changes, and the stresses created within the pavement by shrinkage when it cures.

When used together and in combination with the Westergaard Method or Hetenyi Method pavement design spreadsheets, the user can perform a full structural analysis of the stresses to be resisted by any new pavement slab subject to any loading arrangement.

The suite includes a total of 2 spreadsheets;

  • A spreadsheet analysing the stresses created within a concrete pavement due to temperature related curling.
  • A spreadsheet analysing the stresses created within a concrete pavement due to shrinkage during curing.

For a fully functional free trial of these spreadsheets, please enter your email address below.

Concrete Pavement Design – Non Loading Stresses Analysis Suite (2 Spreadsheets)

Just £10!

License Type

Other Concrete Road & Pavement Design Spreadsheets from CivilWeb...

Concrete Road Design – TRL 87 Method

Analysis and design of a concrete road using the TRL 87 Method.

Industrial Concrete Paving Design - Heavy Duty

Heavy Duty Industrial Concrete Pavement Design using the Interpave Heavy Duty Pavements design guidance

Industrial Concrete Paving Design - Meyerhof Method

Industrial Concrete Pavement Design using the Meyerhof Method from the TR34 design guidance

Industrial Concrete Paving Design - Hetenyi Method for UDLs

Industrial Concrete Pavement Design using the Hetenyi Method for UDLs

Industrial Concrete Paving Design - Westergaard Method

Industrial Concrete Pavement Design using the Westergaard Method

Industrial Concrete Paving Design – HD Block Paving Design

Industrial Concrete Pavement Design using the Williams Method for HBM based pavements

Concrete Paving Design – Fibre Reinforced Concrete Pavement Flexural Strength

Concrete Pavement Analysis tool for estimating the flexural strength of polypropylene fibre reinforced slabs

Concrete Paving Design – Conventionally Reinforced Concrete Pavement Flexural Strength

Concrete Pavement Analysis tool for estimating the flexural strength of conventionally reinforced slabs

Concrete Paving Design – Dowelled Joint Design

Concrete Paving Design tool for design of dowelled joints

Concrete Paving Design – Tied Joint Design

Concrete Paving Design tool for design of tied joints

Concrete Paving Design – Induced Joint Aggregate Interlock Analysis

Concrete Paving Analysis tool for estimating the differential movement across sawn joints

Concrete Paving Design – Vehicle Loading Calculations

Concrete Paving Design tool for calculating the design loads on a concrete road or industrial pavement

Concrete Paving Design – Curing Analysis

Concrete Pavement Analysis tool for estimating the bleeding and evaporation rates from newly poured concrete paving

Concrete Road Design – AASHTO Method

Analysis and design of a concrete road using the AASHTO Method

Concrete Paving Design – Punching Shear

Concrete Paving Design tool for calculating the punching shear capacity of concrete pavement slabs