Industrial Concrete Paving Design Spreadsheet – HD Block Paving Design

This suite of 8 spreadsheets allows the designer to undertake the structural design and analysis of a concrete block paved industrial pavement using the method developed by Williams for pavements with HBM sub bases.

The Williams Method is an accepted method of design for any block paved industrial pavements with HBM sub bases.

The spreadsheet calculates the required HBM layer thickness to withstand the user defined loading conditions. The user can choose from three standard HBM specifications.

The spreadsheet includes unique features to analyse the effects of different loading conditions, allowing the designer to quickly specify a HBM pavement design to suit any required loading conditions.

A further set of spreadsheets are included to allow the designer to calculate the Single Equivalent Wheel Load (SEWL) for various pieces of equipment and for shipping container stacking arrangements. This includes spreadsheets for all commonly used wheeled equipment used in industrial sites.

The suite includes a total of 8 spreadsheets;

  • A spreadsheet calculating the required HBM layer thickness to withstand the user defined loading conditions.
  • 7 Single Wheel Equivalent Load calculation spreadsheets for front lift trucks, reach stackers, straddle carriers, rubber tyred gantry cranes, side lift trucks and tractor/trailer set ups.

For a fully functional free trial of these spreadsheets, please enter your email address below.

Concrete Pavement Design – HD Block Paving Method Suite (8 Spreadsheets)

Just £10!

License Type

Other Concrete Road & Pavement Design Spreadsheets from CivilWeb...

Concrete Road Design – TRL 87 Method

Analysis and design of a concrete road using the TRL 87 Method.

Industrial Concrete Paving Design - Heavy Duty

Heavy Duty Industrial Concrete Pavement Design using the Interpave Heavy Duty Pavements design guidance

Industrial Concrete Paving Design - Meyerhof Method

Industrial Concrete Pavement Design using the Meyerhof Method from the TR34 design guidance

Industrial Concrete Paving Design - Hetenyi Method for UDLs

Industrial Concrete Pavement Design using the Hetenyi Method for UDLs

Industrial Concrete Paving Design - Westergaard Method

Industrial Concrete Pavement Design using the Westergaard Method

Concrete Road Design – AASHTO Method

Analysis and design of a concrete road using the AASHTO Method

Concrete Paving Design – Fibre Reinforced Concrete Pavement Flexural Strength

Concrete Pavement Analysis tool for estimating the flexural strength of polypropylene fibre reinforced slabs

Concrete Paving Design – Conventionally Reinforced Concrete Pavement Flexural Strength

Concrete Pavement Analysis tool for estimating the flexural strength of conventionally reinforced slabs

Concrete Paving Design – Dowelled Joint Design

Concrete Paving Design tool for design of dowelled joints

Concrete Paving Design – Tied Joint Design

Concrete Paving Design tool for design of tied joints

Concrete Paving Design – Induced Joint Aggregate Interlock Analysis

Concrete Paving Analysis tool for estimating the differential movement across sawn joints

Concrete Paving Design – Vehicle Loading Calculations

Concrete Paving Design tool for calculating the design loads on a concrete road or industrial pavement

Concrete Paving Design – Curing Analysis

Concrete Pavement Analysis tool for estimating the bleeding and evaporation rates from newly poured concrete paving

Concrete Paving Design – Non Loading Stresses

Concrete Paving Design tool for calculating the stresses acting on a concrete slab due to curling and shrinkage

Concrete Paving Design – Punching Shear

Concrete Paving Design tool for calculating the punching shear capacity of concrete pavement slabs